Take your lift to the extreme with the High Lifter 10" Big Lift Kit for the Polaris RZR 1000! This all inclusive kit provides everything you need to clear tires up to 34.5" and conquer the gnarliest mud holes around. This kit comes powder-coated in black. Kits are available raw or in custom colors. Allow up to 5 days for powder-coating.
Bigger. Badder. BOLDER. Take your SXS to the edge with High Lifter’s 10" Big Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 20 years perfecting the ultimate lift kit. The product? The Big Lift Kit is even easier to install with a bolt-on application that consistently measures truer over competitor products.
Each lift kit comes with four Outlaw RCV Axles or four Outlaw DHT XL Axles that are custom tuned for use with the 10” High Lifter Lift Kit.
Outlaw RCV Axle:
The Outlaw RCV axles are proudly built and assembled in the USA. Assembled by High Lifter and Manufactured by RCV Performance, the makers of high performance drive line products.
- The Outlaw RCV uses the RCV Performances patented cage
- Sliding bars on both ends for increased angle capability
- Bars, housings, cages, and races made of high strength alloy steel
- Well established and proven design
Outlaw DHT XL Axle:
- Dual heat treatments on the housings to improve toughness against shock loads without compromising bearing surfaces and long term life
- Oversized CV joint housings to increase strength
- Housings and bars made from 4340 Chromoly steel
- Puncture-resistant boots which are durable in high and low temperature climates
- Molybdenum disulfide, anti-oxidation, rustproof, and high-performance
This 10" lift kit package includes the following components:
- Heavy duty laser cut front and rear upper lift/shock relocation brackets
- Four custom heavy duty Max Clearance Control Arms crafted from 1 1/4"x.120 wall DOM tubing, heavy duty support gussets, and shock mounts
- Two Custom heavy duty Max Clearance Trailing Arms
- Full set of custom heavy duty Max Clearance Radius Bars
- Front and rear custom High Lifter springs
- Four Outlaw RCV or DHT XL Axles
- Custom rear brake line kit
- All required hardware and brackets
- Detailed instructions with step-by-step photos
Up to 38" OL3
Our stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision.
NOTE: All Outlaw RCV Axles MUST be registered with High Lifter within 30 days of purchase for warranty to be valid. Customer must register the Outlaw RCV Axles by sending the completed Axle Warranty Registration Card included in each axle box along with a copy of the original sales receipt to High Lifter.
NOTE: This kit does not work on any Polaris RZR 1000 Ride Command Models due to wiring harness length.
2016 Polaris RZR 1000 XP EPS
2016 Polaris RZR 1000 XP High Lifter Edition
2016 Polaris RZR 1000 XP 4 EPS
2016 Polaris RZR 1000 XP 4 High Lifter Edition
2015 Polaris RZR 1000 XP EPS
2015 Polaris RZR 1000 XP High Lifter Edition
2015 Polaris RZR 1000 XP Desert
2015 Polaris RZR 1000 XP 4 EPS
2015 Polaris RZR 1000 XP FOX Edition
2017 Polaris RZR 1000 XP 4 EPS
2017 Polaris RZR 1000 XP EPS
2017 Polaris RZR 1000 XP SE EPS
2018 Polaris RZR 1000 XP EPS
2018 Polaris RZR 1000 XP Trail & Rocks
2018 Polaris RZR 1000 XP 4 EPS