Free Air REVO subs are recommended primarily for Infinite Baffle (Free Air) applications where a dedicated subwoofer enclosure is not available or practical. Both 10” & 12” REVO FA subs are available in White or Black frames (Black frames use metallic grey cones). All REVO FA Subs are available in either single 2 Ohm or single 4 Ohm impedances.

 

All REVO 10” & 12” Subwoofers share the same design features: 

Powder Coated Cast Aluminum (REVO10/12) or Nylas Composite (REVO8) Frame - to withstand extreme environmental use. Designed to accept optional RGB wiring.
Injection Molded Composite Cone – For durability & low distortion.
Santoprene Rubber Spider – Much more durable to water & temperature changes than a traditional treated Cotton Spider used by the majority of marine speakers & subwoofers.
Santoprene Rubber Surround – Offers a superior bond to the composite cone.  Also resists deterioration due to water, temperature & ultraviolet exposure.
Gold Plated Terminals – Designed to resist corrosion.
All REVO Subwoofers are sold without grills.  8 different grill designs are available separately for all versions of 10” & 12” REVO HP & FA subwoofers.  This will enable users to have matching grills on both REVO Coaxial In-Boat speakers & REVO Subwoofers.

Optional RGB LED Kits are available to fit under all REVO 10” & 12” subwoofer grills to enable users to have thousands of LED light display combinations.

Specifications:
Impedance:    4 ohms    
RMS Watts:    500
PEAK Watts:    1000
Frequency Response:    20Hz to 400HZ
Sensitivity:    88 db at 1watt/1 meter
Weight:    17.6 lbs (7.98kg)

Diameter:    12.6 inches (320.04mm)     
Mounting Depth:    4.92 inches (124.96mm)     
Hole Cut Out:    11.26 inches (286.00mm)     
Vented Enclosure:    1.7 cu ft (Optimum: Tuned at 41 Hz)     
Box Specs    Optimized for Infinite Baffle (Free Air) applications or 1.3 cu ft sealed enclosure     
Note:    All specifications are for each REVO-12FA

Wet Sounds REVO-12FA Free Air Marine Subwoofer

Color